6210NR NSK Open Deep Groove Ball Bearing with Snap Ring Groove. 50mm inside x 90mm outside x 20mm wide

NSK Pressed Steel Cages Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass cages are used. Machined cages are also used for high speed applications.

Inside diameter: 50mm
Outside diameter: 90mm
Width: 20mm

Basic Load Ratings
Dynamic: 35.0kn
Static: 23.2kn

Speed Ratings
Limiting speed Grease: 7,100 rpm
Limiting speed Oil: 8,500 rpm